Testing Method to identify Counterfeit Multilayer Ceramic Capacitors
Written by Yung-Hsiao Chung, Cheng-Hsun LEE, Liwei Xu, Yuqian Hu, ZongXuan Wang and Stephen E. Saddow
1 Global ETS-USA, Odessa, FL 33556, USA
2 Department of Electrical Engineering, University of South Florida, Tampa, FL 33620, USA
Abstract: Due to the high-volume production of mobile phones and computer tablets, the demand for MLCCs (Multilayer Ceramic Chip capacitors) has started to outstrip supply, especially for custom MLCCs. This is particularly true for Class I MLCCs with special specifications such as high voltage and frequency stability, and for such stringent applications as automotive, military and aerospace. Under these conditions, the opportunity for counterfeit OEM and replacement capacitors to enter the supply chain continues to grow. This is especially true as the majority of MLCCs have no marking and cannot easily be distinguished from their package, which gives unscrupulous vendors opportunities for fraud.
This paper introduces several test methods for MLCC compliance verification, namely 1) The effect of DC bias on capacitance, 2 ) Capacitance temperature characteristics, 3) High voltage testing of DCW (Dielectric withstand voltage) and IR (Insulation Resistance), 4) Cross section (Dielectric layer and terminal comparison for flex types), and 5) electron microscopy (EDS) material analysis to match with known good device chemical composition.
Dilution of Dynasolve 750 Solvent for Solvent Test Improvements
Neckodemos Davison, Cheng-Hsun Lee, Stephen E. Saddow, and Yung-Hsiao Chung
Department of Electrical Engineering, University of South Florida, Tampa, FL 33620, USA; email@example.com
Destructive Testing Department, Global ETS-USA, Odessa, FL 33556, USA; Lee@gets-USA.com
Department of Electrical Engineering, University of South Florida, Tampa, FL 33620, USA; firstname.lastname@example.org
Engineering Department, Global ETS-USA, Odessa, FL 33556, USA; Steven@gets-USA.com
Abstract: The electronic assurance testing industry has significantly grown in the last decade due to the increase in counterfeit electronic component insertion into the world market place. This study seeks to improve the current standards of heated solvent testing in the destructive testing portion of the electronic testing industry. The evidence in this report supports an economical solution to the issue of exemplar integrated circuit (IC) component casings becoming heavily damaged during heat solvent tests along with counterfeit IC components. The method proposed is to dilute the most commonly used solvent, Dynasolve 750, with 1-Methyl-2-pyrrolidinone in a ratio of 2:8, respectively, while applying the standard testing procedure from standard Dynasolve 750 tests. This dilution produces testing results in exemplar components that show very similar surface topography to untested exemplar components while simultaneously destroying the casings of counterfeit components. Multiple tests of this new method, in conjunction with scanning electron microscope (SEM) inspection, were conducted on various types of IC components in this study to support these findings.
Xilinx FPGA Certification Challenge
Abstract: This research discusses how Global ETS is able to identify counterfeit Xilinx FPGAs for our customers.
After a brief introduction of how Xilinx tried to prevent counterfeit FPGAs from entering the supply chain, we will discuss the Global ETS solution to this problem. The overall details of our approach are as follows:
• We support all package types via a custom IC test fixture
• Comprehensive testing data is taken to adequately determine part authenticity
• Fast turn time – complete testing for our customers can be completed in 7 days
• We have the ability to accurately determine the speed ranges at specified chip temperature
• This is accomplished with a proprietary program using an AI algorithm and machine learning
• This includes the ability to determine if devices are Engineering Samples or Production devices